Industries

Hyosung — Application request cards

Pick the setting that changes the fiber question.

Application request cards

Comfort and daily contact
Discuss
Touch, recovery and the care cycle the wearer or the upholstery actually sees.
Include
The fiber reference and the fabric that will touch skin or a seating surface.

Stretch fiber development for apparel starts with hand, not with a single recovery percentage. A covered yarn can feel dry while a bare elastane knit feels lively, even when both notes mention a similar denier. Ask how the lab measures stretch recovery, whether the specimen was relaxed or held, and which wash or dry cycle the buyer treats as normal. Colorfastness and pilling show up after that cycle. They are cloth behaviours. Hyosung fiber wording on the cone does not predict them.

Natural and synthetic routes are a selection argument, not a moral ranking. A cotton-rich host may be chosen for moisture feel. A synthetic filament may be chosen for strength and drying. The brief should say which sensation or process is allowed to lose, because a comfortable knit and a high-recovery knit are not the same target.

Outdoor and performance
Discuss
Exposure, reinforcement form and the method already written in the file.
Include
Construction, specimen state and the grade phrase without widening it.

Outdoor and performance conversations split as soon as the object changes. A stretch panel in a soft shell still needs air permeability, dimensional stability and the care label. A carbon fiber enquiry, including a search such as hyosung advanced materials carbon fiber, needs the reinforcement architecture and the load case. Tensile strength of a tow and tear strength of a woven cloth are different measurements. A coated cloth is reviewed through coating add-on and adhesion. A laminated cloth is reviewed through film structure and peel on the stated specimen. Hydrostatic head, often discussed in millimetres of water, and water vapor transmission describe those cloth constructions. They should not be copied onto a dry fiber package just because the end use is outdoor.

If the file already says hyosung h3065 carbon fiber t1000 grade, keep that string intact and ask which specimen produced any modulus or strength figure. A class name from a filament datasheet does not automatically describe a stitched reinforcement or a prepreg after a cure cycle the buyer has not shared.

Processing and technical use
Discuss
Warping, knitting, weaving, cutting or layup, each as its own condition.
Include
Supply format, finish and the dimensions that belong to that format.

Mills consume fiber in a format. Cones, beams, tow and cut lengths do not share a usable width. Usable width in centimetres and GSM in g/m² appear when the material has become a cloth. A cloth listed at 160 g/m² still needs its own width; the mass figure does not imply a 150 cm cuttable width. Before that, the useful numbers are linear density, filament count if known, and the spin finish or size that the machine will see. Denier remains grams per 9,000 metres. Seam slippage and abrasion resistance can be discussed only after a seam or a surface exists. Abrasion and hand feel are separate targets: a harsher surface can raise a durability result while the comfort brief asked for a softer face.

Stock and custom development are also different ledgers. A stock question needs a dated package identity. A custom question needs the change being explored and the review gate, such as a handling sample or a method-specific test. Neither question on this page confirms inventory, a minimum or a lead time. Hyosung textiles buyers can still send both, as long as the card says which one is open.

Describe the use environment

Exposure, care and processing make the fiber brief specific.

Discuss your fabric requirements